Article

Installation Guide for 09-14 Ford F-150 PRO-Series LED Tail lights

img_slogan_242424

THIS GUIDE IS FOR​

ALPHAREX specializes in designing and producing superior and uniquely stylish aftermarket automotive performance lighting with unrival innovative technology. The following installation guide we take you through the installation of your new ALPHAREX TAIL LIGHTS for your 09-14 Ford F-150 step by step.

Table of Contents

Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.

INSTALLATION TOOLS

1/4 Ratchet
Power Tool
Phillips Screwdriver
1/4 Extension
Socket
Size NEEDED
8

NOTE: Whenever using a power tool, please make sure do not overtighten the screws.

Whenever working on your vehicle
always make sure your vehicle is parked with the ignition off.

PART I - REMOVE TAIL LIGHTS

REMOVE TAIL LIGHTS BOLTS

Open the trunk gate and start by removing the tail light’s bolts.

Remove the top and bottom 8mm bolts from each side of the tail lights.
NOTE: Whenever using a power wrench, please make sure do not overtighten the bolts.

Gently remove the tail light by pulling outward.

REMOVE SOCKETS AND UNPLUG THE LIGHT BULBS

Remove the sockets and uninstall the factory tail light.

Repeat the steps for the other side to remove the tail lights completely.

PART II - INSTALL TAIL LIGHTS

PLUG THE SOCKETS AND INSTALL TAIL LIGHTS

First, plug and install the reverse light bulb into the new Alpharex tail light.

Plug the wire connectors into the sockets directly to the new ALPHAREX tail lights.

Twist and secure the socket into the new tail lights.
Reverse the removal process to install the new tail lights into the vehicle.

Use ratchet to tighten the 2 X 8mm bolts for each side.

NOTE: Whenever using a power wrench, please make sure do not overtighten the bolts.

COMPLETE INSTALLATION

Congratulations!
you have completed the installation for ALPHAREX 09-14 Ford F-150 PRO-Series LED tail lights.

Shopping cart
Start typing to see products you are looking for.